In order to make fish feed pellets, most people choose floating diesel engine fish feed machine. Because the fish feed pellets floating on the water surface can be easily eaten by fish. At the same time, it can limit the pollution of fish feed to the air. The floating fish feed pellets expand at high temperature and cook in the molding die, which is easy for fish to digest.
Although we call this pellet mill a floating fish feed pellet machine, the pellets made from if can also be used to feed pets and other plankton. The diameter of the remaining pellet can be 0.9-10 mm, depending on the need. It can be floating or sinking. If the percentage of starch in the biomass is much less than 35%, the pellet will sink into the water.
Diesel engine fish feed machine is running on diesel engine as the power. The factory provides various templates with apertures of 0.9-15 mm, which can expand more than 30 kinds of commonly used pellet feeds. The production capacity varies from 30 kg to two tons per hour. In addition, we offer die plates with the best compression ratio so that every pellet you make is smooth, uniform and shiny.
Diesel engine fish feed machine structure design is scientific and reasonable, small footprint, low noise, high output, low energy consumption. High granulation rate, smooth surface, easy to store and transport. The equipment is simple to operate and maintain, safe and reliable, favored by small and medium-sized fish farms and breeding farms. Fish feed production plant.
Used to process various grain materials into high-grade aquatic pellet feed for fish, dogs, turtles, frogs, shrimps, crabs, etc. Production needs. We also provide diesel engine fish feed machine, which is very suitable for large-scale fish farming and fish feed production.
Working Principle of diesel engine fish feed machine
1.Cutting. The extruded material is stacked to a certain length and then cut to the desired size.
2. Extrusion. After tempering, the material enters the extrusion chamber of the screw conveyor, and the shape of the extrusion chamber gradually becomes smaller along the direction of the material. Materials in the process of movement pressure is increasing, while the material in the screw conveyor extrusion cavity accompanied by strong shear, kneading and friction, the material temperature rises sharply.
3. Expansion. When the material reaches the exit of the extrusion chamber of the screw conveyor, the pressure is maximum. After extruding the extrusion chamber, the pressure suddenly disappears, while the heat and moisture quickly dissipate, so that the volume of the material rapidly increases and expands.
4. Dispersion. After the material enters the extruder, it should be tempered first. Similar to the tempering process of diesel engine fish feed machine, the material should be both humidified and heated. The purpose of tempering is to increase the heat and humidity of the material to facilitate the rapid maturation of the material in the subsequent extrusion process.
advantages of diesel engine fish feed machine
1. Solve the problem of insufficient and unstable electricity, no three-phase electricity is needed, but output is required.
2. A variety of aperture 0.3-15mm mouth die, which can extrude more than 30 kinds of common feed pellets.
3. Advanced frequency conversion speed control system, by changing the rotating speed, different specifications of pellets can be produced.
4. 4 kinds of dies are available to meet various size requirements. They are easy to take out and replace.
5. The regulator is connected to the boiler, which can pre-steam the material comprehensively and improve the quality and efficiency of the pellets obviously.
6. The performance of the diesel engine fish feed machine is stable and can work continuously.
